3-in-1 Vacuum Top & Side Hot Sealing and Pre-sealing and Standing Machine
Product Introduction
This equipment is mainly applied to the battery standing step, enabling the electrolyte to integrate more completely with the electrodes in the vacuum condition. It is also suitable for the top and side sealing of aluminum laminated film for pouch cell, as well as the pre-sealing process. This versatile machine is an essential equipment for enhancing the efficiency and quality of battery production.
Features
• It is a multiple functional machine, 3 in 1 machine for pouch cell research.
• Different vacuum standing parameters can be saved.
• Copper sealing head makes it firm sealing and high efficiency working.
• Upper and lower sealing head sealing time can be set.
• Through perspective window to observe the changes inside the chamber during work.
• This equipment is applicable for different battery sizes, simple to regulate.
• Compact size, it can be operated in glovebox.
• Touch screen operation, high automation.
• It is equipped with safety protection device to prevent injury.
Technical Parameter
| Model |
STC-BYF-200RJ
|
| Voltage |
AC220V±10%, 50Hz |
| Power |
Adopting 250W heat tube, the power consumption when heating is about 500W |
| Sealing blade length |
200mm, other sizes can be customized |
| Sealing edge width |
5mm, other sizes can be customized |
| Sealing blade temperature |
RT~250℃ adjustable |
| Temperature control accuracy |
±2℃ |
| Hot sealing pressure |
0~6kg/cm2 adjustable |
| Hot sealing time |
0~99s adjustable |
| Vacuum standing time |
0~9999s adjustable, pressure adjustable |
| Vacuum degree |
Above -95KPa |
| Gas consumption |
About 0.2L compressed gas per sealing |
| Air pressure working speed |
≥ 180 times per hour |
| Compressed air |
0.5~0.7Mpa, if the unit is placed in a glovebox, air source should be used in accordance with the working air of the glovebox |
| Sealing blade material |
Brass |
| Dimension |
Electric box: L560 * W220 * H340mm
Working box: L500 * W350 * H630mm
|
| Weight |
90kg |
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch, which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site installation service.
|
|
3-in-1 Vacuum Top & Side Hot Sealing and Pre-sealing and Standing Machine Images
|
